Taztel support staff is
available 24x7 to provide any tech support or answer any question
regarding new or existing account.
Telephone # 210-699-0444
FAX # 210-699-3139
Email :
support@taztel.com
sales@taztel.com
Installation
Need help installing your Taztel telephone
adopter. Here is the step by step procedure:
Getting Started
You have received: · Telephone Adapter
(ATA) · Ethernet Cable · AC Power Adapter
Equipment you will need: · Broadband Connection:
DSL, cable, T1 other high-speed Internet connection ·
Router: You need a router to share your internet connection
with more than one device (If you don’t already have a
router, they are available at most computer and office supply
stores for around $20) · Normal Analog Telephone
Installation & Set-up
Installing the Taztel Telephone Adapter:
1. Remove the Taztel adopter from the shipping container.
2. Insert the Ethernet cable provided into the LAN port. Connect
the other end of the Ethernet cable into an open port on your
router.
Figure 1: Taztel Telephone Adapter
3. Insert the telephone cable into the Phone
1 port of the Taztel Telephone Adapter.
4. Connect the other end of the telephone cable to a traditional
analog telephone.
5. Insert the appropriate end of the power cord into the Taztel
Telephone Adapter. Plug the other end into a power outlet
or surge protector.
6. The green STATUS Light will blink for up to 1 minute. Once
the light stops blinking, you are ready to start making calls!
7. Figure 2: Network Connections
NOTE: The instructions in this Quick Start Guide
do not consider all types of connections. For more information
and troubleshooting tips, go to www.taztel.com
8. If for ANY reason you encounter difficulties during this
installation process, remember that help is available at (210)
699-0444or by email support@taztel.com
